User Guide 61
Add Voice Dial
You can add a new voice dial to your phone.
1. Select Menu > Settings > My Phone >
Voice Features > Add Voice Dial.
2. At the voice prompt, say a name.
3. At the voice prompt, repeat the name.
4. Select one of the following:
–
Add New creates a new contact.
–
Add to existing adds the voice tag to an
existing contact.
Erase Voice Dial
You can erase all existing voice dial tags from
your phone. Select
Menu > Settings >
My Phone > Voice Features >
Erase Voice Dial > Yes.
Voice Training
If you phone is having trouble recognizing your
voice, you can train with the Yes, No, and Wake up
commands. Select
Menu > Settings >
My Phone > Voice Features > Voice Training >
OK > Train All or the item you want to train.
Follow the prompts for each word until training
is complete.
Voice Wake-Up
You can set your phone to make a call using a
hands-free accessory.
Note: Voice Wake-up does not work with
keyguard active.
Enable voice wake-up
Select
Menu > Settings > My Phone >
Voice Features > Voice Wake-Up >
With accessory to enable calls with an accessory.
Use voice wake-up
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two
tones.
If the phone does not recognize your Wake Up
command, see “Voice Training” on page 61.
Voice Answer
You can set your phone to answer a call
automatically when using a hands-free accessory.
Enable voice answer
Select
Menu > Settings > My Phone > Voice
Features
> Voice Answer > Enabled to enable
answering calls with an accessory.
To use the voice answer feature, you must have
the
Auto-Answer feature (see “Auto-Answer” on
page 62) disabled and the phone set to
Normal
Sounds
(see “Silent Mode” on page 55).
Use voice answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
contact entry in your phone, the phone prompts
“Incoming call from (Name), answer?” Say “Yes”
or press any key except the
End key to answer.
82-G1934-1EN.book Page 61 Sunday, October 14, 2007 6:19 PM