Kyocera VMS200 Cell Phone User Manual


 
12 Emergency services
Send a call to voicemail
To immediately send a call to voicemail without
answering it, select
Ignore.
Note: Make certain that Open to answer is
Disabled, or else opening the flip will answer the
call. See “Open to answer” on page 43.
Check voicemail
When a voice message is received, your screen
displays a notification along with a voicemail
message icon at the top of your screen. The
symbol flashes if the message is urgent. If you see
a notification:
1. Select
Voicemail to call your
voicemail number.
2. Follow the system prompts to retrieve
the message.
Note: To clear the screen without checking
messages, select
Dismiss.
If you see only the voicemail message icon:
1. Press and hold the 1 key to call your
voicemail number.
2. Follow the system prompts to retrieve
the message.
Emergency services
Call emergency service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the
Send key.
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Exit emergency services
When you have completed the emergency call:
1. Select Exit.
2. Select
Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Location” on page 44.
Airplane mode
While in an airplane, you can set your phone to
Airplane mode where your phone does not emit
RF signals. See “Airplane mode” on page 39.
82-K8214-1EN.book Page 12 Tuesday, May 27, 2008 5:36 PM