Kyocera VMS200 Cell Phone User Manual


 
42 Call options
Digit lengths
Use the digit lengths to determine whether to limit
your dialed numbers to North American numbers
or any numbers. Select
Menu > Settings >
Call options > Voice dialing > Digit lengths
and one of the following:
North American recognizes only digit strings
of lengths that correspond to valid North
American dialing numbers of 7-digits,
10-digits, or 1+10-digits to improve accuracy.
Permit all allows any digit strings of 4 to 14
digit lengths.
Voice answer
You can use your voice to answer a call when
using a hands-free accessory.
Enable voice answer
Select
Menu > Settings > Call options >
Voice dialing > Voice answer > With accessory
to enable answering calls with an accessory.
Note: To use the voice answer feature, you must
have the
Auto-answer feature disabled (see “Auto
answer” on page 42) and the
Out of headset
option selected (see “Headset sound” on
page 45).
Use voice answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. If the caller is
recognized as a contact entry in your phone, the
phone prompts “Incoming call from (Name),
answer?”. Say “Yes” to answer or “No” to silence
the alert without answering.
Voice wake-up
You can activate voice dialing by saying “wake up”
twice. Select
Menu > Settings > Call options >
Voice dialing > Voice wake-up >
With accessory to enable calls with an accessory.
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your Wake Up
command, see “Voice training” on page 42.
Voice training
You can train your phone to recognize specifically
your voice for numbers. Use voice training only
when you find your voice not recognized with
acceptable accuracy.
If your phone is having trouble recognizing your
voice, select
Menu > Settings > Call options >
Voice dialing > Voice training > OK >
Train numbers. Follow the prompts for each
number until training is complete.
Auto answer
With a headset or hands-free kit attached to
your phone, you can set the phone to
answer automatically.
Select
Menu > Settings > Call options >
Auto-answer > After 5 seconds. The phone
automatically answers after 5 seconds.
82-K8214-1EN.book Page 42 Tuesday, May 27, 2008 5:36 PM