Filter
Top Products
RD6000
27
RD6000
26
RReecceeiivviinngg CCaallllss
1. When the phone rings or vibrates press to
answer.
If you press or the side keys while the
phone is ringing, the ringing or vibration is
muted for that call.
2. Press or twice to end the call.
UUssiinngg VViibbrraattee,, SSiilleennccee AAllll,, aanndd
LLoocckk MMooddee
Vibrate Mode (Quick)
Use the Vibrate Mode in public places.
1. When in the Standby Mode, activate the Vibrate
Mode quickly by pressing for 3 seconds.
When the Vibrate Mode is set, the key tones are
silent, and the phone is set to vibrate.
When flip of the phone is closed, press and hold
Voice Dial Key to enter into vibrate mode.
NOTE:The phone remains in Vibrate Mode even if
you turn it off and back on.
NOTE:To cancel Vibrate Mode, press to switch
into Silence All or Normal Mode.
MMaakkiinngg aa CCaallll
When you make a call, follow these simple steps:
1. Make sure the phone is turned on. If not, press
.
2. Enter the phone number, with area code (if needed).
3. Press . lf the phone is locked, enter the lock
code.
Call Failed - indicates that the call did not go
through.
Restricted - indicates outgoing calls are in
restricted mode.You can only dial phone
numbers saved in the Emergency or Phone
Book list.
To turn off this function:
Menu -> Settings -> Security -> Enter
Lock Code -> Restrict -> Off -> OK
4. Press to make the call.
If one-touch is enabled, type in the phone book
speed dial number or hold the last digit until the
call is made.
NOTE:The phone number and entry name appear
on the display when you type in the speed dial
number and hold the last digit.
Correcting Dialling Mistakes
If you make a mistake while dialling a number, press
once to erase the last digit entered or hold down
for at least two seconds to delete all digits.
BASIC FUNCTIONS
RD6000-E.qxd 6/18/04 9:56 AM Page 26