Filter
Top Products
RD6000
77
RD6000
76
Service Change (Menu )
Alerts you when service changes. When you
enter a service area, the phone displays
Entering Service Area message. When you
leave a service area, the phone displays
Leaving Service Area message.
Call Connect
(Menu )
Alerts you when the call is connected.
Back To T
op (Menu )
Alerts you when you scroll through the end of a
menu list.
4. Select an option and press .
5. Set
On / Off
with and then press .
Power On/Off Tone (Menu )
Set Power On / Off Tones.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds and then press Power On/
Off Tone.
4. Set On / Off with and then press .
MENU FEATURES
RD6000
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling
by the simultaneous transmission of two tones, one
from a group of low frequencies and another from a
group of high frequencies. Each group of
frequencies consists of four frequencies. Setting
Key Beep length to Long will extend the DTMF tone.
Press Menu, then press
,,
Key Tones
using then select Long. Press .
Volume (Menu )
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds and then press
Volume.
4. Select Ringer / Earpiece / Key Beep.
5. Adjust the volume of the ringer with .
6. Then press to save the Volume.
Alerts (Menu )
Any of the three Alert options can be turned on or off.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds and then press
Alerts.
Check each option and turn it off if not desired.
RD6000-E.qxd 6/18/04 9:57 AM Page 76