Filter
Top Products
15
2. Gently uncover the Accessory/
Charger Port, then plug the USB
cable into it and the other end
into an electrical outlet.
The charge time varies
depending upon the battery
level.
Charging with USB
You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
need to have the necessary USB
driver installed on your PC first.
Connect one end of the USB cable
to the Accessory/ Charger Port on
your phone and the other end to a
high-power USB port on your PC
(commonly located on the front
panel of the computer).
NOTE
Low-power USB ports are not
supported, such as the USB ports
on your keyboard or bus-powered
USB hub. The LG USB Driver is
downloadable from the www.lge.com.
Battery Temperature
Protection
If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.
How to Install Your microSD
™
Card
1. Remove the back cover and
locate the microSD
™
slot.
2. Insert the microSD
™
card with the
contacts facing downwards until it
clicks into the slot.
NOTE
If you insert the card in the
wrong direction, it may damage
your phone or your card.
NOTE
Memory card is
sold separately.
NOTICE
Please make sure that the "B" side faces
up before inserting a USB cable into the
Accessory/Charger Port of your phone.
VN251S_VZW_UG_EN_V1.0_130410.qxd 4/11/13 1:44 PM Page 15