Filter
Top Products
90
TTY + Hear: Users who can hear
but cannot talk send a text
message and receive voice
through TTY equipment.
TTY Off: Users send and receive
without TTY equipment.
Connecting TTY Equipment and a
Terminal
1. Connect a TTY cable to TTY
connection on the terminal (TTY
connection location is the same
as a headset jack).
2. Enter the phone menu and set
the desired TTY mode.
3. After setting a TTY mode, check
the LCD screen of the phone for
the TTY icon.
4. Connect the TTY equipment to
the power source and turn it on.
5. Make a phone connection to the
desired number.
6. When connection is made, use
the TTY equipment to type in
and send a text message or send
voice.
7. The voice or text message from
the receiver end displays on the
TTY equipment display.
9.6 One Touch Dial
Allows you to initiate a speed dial
call by pressing and holding the
speed dial digit. If set to Off, Speed
Dial numbers designated in your
Contacts will not function.
1. From standby mode, press
[
MENU
].
2. Press
Settings & Tools
.
3. Press
Call Settings
.
4. Press
One Touch Dial
.
5. Use the Directional Key to
highlight
On
or
Off
, then press
.
9.7 Voice Privacy
Allows you to set the voice privacy
feature for CDMA calls. CDMA offers
inherent voice privacy. Check with
your service provider for availability.
1. From standby mode, press
[
MENU
].
2. Press
Settings & Tools
.
3. Press
Call Settings
.
4. Press
Voice Privacy
.
5. Use the Directional Key to
highlight
On
or
Off
, then press
.
Settings & Tools
90
VN251S_VZW_UG_EN_V1.0_130410.qxd 4/11/13 1:44 PM Page 90