Filter
Top Products
61
MANUAL MODE
60
M-MODE FLASH
When the built in flash is up or
an attached accessory flash is
on, it will fire each time a picture
is taken. The camera's TTL
control ensures a proper
exposure.
METER INDEX
In manual mode, the metering index will show you how the
exposure you have set compares with the camera's meter
reading. The 0 position on the index represents the camera's
suggested exposure using the current metering method. The
pointer indicates your settings in relation to the reading in EVs.
• For Metering Index Information, see page 85.
• For Metering Methods, see page 71.
Your settings match the camera's
recommended exposure.
+ 1 EV the camera's recommended
exposure
– 1.5 EV the camera's recommended
exposure
+ 2.5 EV the camera's recommended
exposure
– 2.5 EV the camera's recommended
exposure
– 3.0 EV or below the camera's
recommended exposure
+ 3.0 EV or above the camera's
recommended exposure
• When the flash is ready, will appear in the viewfinder.
• Choose a shutter speed of 1/200 or slower, as this is the sync speed.
• A larger f-number will result in a smaller flash range.
• Push the flash down if it is not needed.
2152EE 17/10/97 10:55 AM Page 60