Filter
Top Products
INSTALLING THE BATTERIES
12 13
Your camera uses one 6-volt 2CR5 battery to supply power for all
camera operations. Please read all warnings in the For Proper and
Safe Use section of this manual, as well as warnings supplied by
the battery manufacturer.
Set the main switch to LOCK.
Slide the battery-cover release
in the direction indicated to
open the cover.
Insert the battery according to
the marks on the inside of the
chamber cover.
Snap the cover closed.
BA
TTERY CONDITION INDICATORS
Full-battery symbol:
Power is sufficient for all camera
operations.
Low-battery symbol:
Power is low, but all functions are
operational. Keep a fresh battery ready.
Blinking low-battery symbol:
Power is extremely low. The battery will
need to be replaced very soon.
Blinking low-battery symbol only:
Power is too low for normal camera
operations. Replace the battery.
• This indicator will appear even while the
main switch is set to LOCK.
No display: Power is too low for any camera operations.
Replace the battery or check that it is inserted correctly.
A battery-condition indicator will appear in the data panel for 5
seconds each time the camera is turned on. This mark signifies
the power status of the battery.
2152EE 17/10/97 10:51 AM Page 12