Filter
Top Products
MULTIPLE EXPOSURE
81
FLASH BRACKETING
80
Press the drive-mode button
in the control panel.
Turn either control dial until
the multiple exposure
indicator appears in the
data panel.
Press the adjust button in the
control panel.
• will start blinking.
The multiple-exposure mode lets you overlap up to 9 images on
the same frame.
Repeat steps 3 and 4 until the series is complete.
• Flash bracketing is equivalent to fill-flash mode.
• Do not turn off or remove the accessory flash before the series is
complete. The remaining shots will be exposed at the flash sync speed,
causing the pictures to be underexposed.
• Flash bracketing will not operate with an accessory flash that is
connected to the camera's PC terminal or the Vertical Control Grip VC-
700's PC terminal via a sync cord (the VC-700 is sold separately).
✎ To cancel the flash bracketing series before it is complete, push the
built-in flash down or turn the camera off.
• The data panel and viewfinder will change to
indicate the frame number in the bracketing series.
Continued on next page.
2152EE 17/10/97 10:57 AM Page 80