Minolta 800si Carrying Case User Manual


 
127
CARE AND STORAGE
126
BEFORE IMPORTANT EVENTS
Check the camera's operation carefully or take test photographs.
• Minolta is not responsible for damages incurred by equipment
malfunction.
OPERATING TEMPERATURES AND CONDITIONS
This camera is designed for use from –20° to 50°C (–4° to
122°F).
• Never leave your camera where it may be subjected to extreme
temperatures, such as the glove compartment of a car.
• In colder temperatures, the data panel response time will be
slow. The display will temporarily darken in higher temperatures.
The display will be restored when the camera is returned to
normal temperatures.
• Never subject your camera to extreme humidity.
• To prevent condensation from forming when bringing the camera
from a cold exterior to a warm building, place it in a plastic bag.
Allow it to come to room temperature before removing it from the
bag.
CLEANING
If the camera or lens barrel is dirty, wipe it gently with a soft,
clean, dry cloth. If the camera or lens comes in contact with
sand, gently blow away loose particles - wiping may scratch the
surface.
• To clean the lens surface, first brush away any dust or sand, then
(if necessary) moisten a lens tissue with lens cleaning fluid and
gently wipe the lens in a circular motion, starting from the center.
• Never place lens fluid directly on the lens.
• Never touch the interior of the camera, especially the mirror and
shutter curtain. Dust on the mirror will not affect the picture
quality.
• Never use compressed air to clean the camera's interior, doing
so may cause damage to sensitive interior parts.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
STORAGE
When storing your camera for extended periods, please follow
these guidelines:
• Remove all batteries from the camera.
• Attach the protective caps.
• Store in a cool, dry, and well-ventilated area away from dust and
chemicals (such as moth balls). For very long periods, place the
camera in an airtight container with a silica gel drying agent.
• Periodically release the camera's shutter to keep it operating
properly.
• Before using after prolonged storage, check the camera's
operation to make sure it is functioning properly.
Continued on next page.
2152EE 17/10/97 11:01 AM Page 126