Filter
Top Products
Messages
37
Copyright © 2005 Nokia. All rights reserved.
Automate voice mail
To automatically access your voicemail messages, you can
insert special characters called dialing codes into phone
numbers and save the number to a speed dialling location.
Dialing codes instruct the receiving system to pause, wait,
bypass, or accept the numbers that follow them in the
dialing string.
Voice mail services vary by service provider. The following
instructions are examples of common operations. Please
check with your service provider for specific instructions
for using your voice mail service.
Voice mailbox number and process
1 Write down your voice mailbox number.
2 Call and check your voice mail as you normally would.
3 Write down your step-by-step interaction with the
recorded prompts. Remember that each voice mail
service varies. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2
seconds, press 1234 and *.
Be precise; you need this information to set up your
voice mail with dialing codes.
Dialing codes
Press * repeatedly to cycle through dialing codes. When
the desired code appears in the display, pause briefly and
the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
* Bypasses a set of instructions.
+ Causes the International access code to be
replaced by +. This is a carrier-dependent feature.
p Pauses for 2.5 seconds before sending any
numbers that follow.
w Waits for you to press the call key before sending
the numbers or codes that follow.