Settings
47
Copyright © 2005 Nokia. All rights reserved.
Make calls
After you have saved your calling card information in your
device, you can make a call using your calling card.
1 In the standby mode, select Menu > Settings > Call
settings > Calling card.
2 Enter your security code, and select OK.
3 Scroll to the calling card of your choice, and select
Options > Select > OK.
4 Press the end key to return to the standby mode; then
enter the phone number, including any prefix (such as
0 or 1) that your calling card may require when you
make a calling card call. See your calling card for
instructions.
5 Press and hold the call key for a few seconds until Card
call is displayed.
6 When you hear the tone or system message, select OK.
International prefix
International prefix options are carrier dependent.
You can store an international dialing prefix into your
device. When you enter + at the beginning of a phone
number, your device automatically inserts the
international dialing prefix that you have stored.
1 In the standby mode, select Menu > Settings > Call
settings > International prefix.
2 Enter the international dialing prefix (for example,
0011) and select OK.
3 In the standby mode, press * twice to use + and enter
the phone number you wish to call, for example,
+3546789.
The device dials the international dialing prefix you
have stored in your device and the phone number you
have entered (for example, the device dials
00113546789).
Data and fax calls
Data or fax calls is a network service. See “Network
Services” on page 8.
If your wireless service provider supports this feature, you
can set up the device to send or receive data or fax calls
when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the device
on a stationary surface. Do not move the device by holding
it in your hand during a data call.
For more information on connectivity, see the PC/PDA
Connectivity Guide. The PC/PDA Connectivity Guide can
be downloaded from the Nokia Web site at http://
www.nokiausa.com/us.
1 In the standby mode, select Menu > Settings > Call
settings > Data/fax calls > Incoming data/fax call
and one of the following options: