Filter
Top Products
Settings
45
Copyright © 2005 Nokia. All rights reserved.
Set a timed profile
Timed profiles can be used to prevent missed calls. For
example, you attend an event that requires your device be
set to Silent before the event starts, but you forget to
return it to Normal until long after the event. A timed
profile can prevent missed calls by returning your device to
the default profile at a time you specify.
Timed profiles can be set up to 24 hours in advance.
1 In the standby mode, select Menu >Settings >
Profiles.
2 Select the profile you wish to activate.
3 Select Timed.
4 Enter the time for the profile to expire, and select OK.
Tone settings
From this menu, you can adjust the ringing volume, keypad
tones, and other tone settings for the currently active
profile. You can also set the device to ring for calls from
phone numbers that belong to a selected caller group. See
“Personalize a profile” on page 44.
Call settings
Anykey answer
Anykey answer allows you to answer an incoming call:
briefly press any key except the power key, right selection
key, or end key.
In the standby mode, select Menu > Settings > Call
settings > Anykey answer > On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic,
resulting in a fast busy signal when you dial. With
automatic redial activated, your device redials the number
until the call is successful, or is terminated.
In the standby mode, select Menu > Settings > Call
settings > Automatic redial > On or Off.
Speed dialling
You can activate or deactivate speed dialling. In the
standby mode, select Menu > Settings > Call settings >
speed dialling > On or Off. See “Speed dialling” on
page 25.