Filter
Top Products
Settings
48
Copyright © 2005 Nokia. All rights reserved.
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
2 When you are finished receiving the fax or data call,
repeat Steps 1 and 2 and select Normal.
Data transfer
To view the transmission speed when sending or receiving
data or fax calls, in the standby mode, select Menu >
Settings > Call settings > Data/fax calls > Data rate
display > Graphic or Off.
Call Summary
Your device can display the time spent on a call when you
hang up.
In the standby mode, select Menu > Settings > Call
settings > Call summary > On or Off.
Phone settings
Phone language
1 In the standby mode, select Menu > Settings > Phone
settings > Phone language.
2 Select the language of your choice.
The language setting may affect the time and date formats
of the clock, alarm clock, and calendar.
Automatic keyguard
You can set the keypad of your device to lock automatically
after a preset time delay.
1 In the standby mode, select Menu > Settings > Phone
settings > Automatic keyguard > On or Off.
2 If you select On, Set delay: is displayed.
3 Enter the delay time (in minutes and seconds), and
select OK.
When keyguard is on, it may be possible to dial the
emergency number programmed into your device.
DTMF tones
DTMF tones are the tones that sound when you press the
keys on your device keypad. You can use DTMF tones for
many automated dial-up services such as banking and
airlines or for entering your voice mailbox number and
password.
DTMF tones are sent during an active call. You can send
them manually from your device keypad, or send them
automatically by saving them in your device.
To set the DTMF tone type: