Filter
Top Products
Settings
49
Copyright © 2005 Nokia. All rights reserved.
1 In the standby mode, select Menu > Settings > Phone
settings > DTMF tones > Manual DTMF tones.
2 Select one of the following options:
Continuous—The tone sounds for as long as you press
and hold a key.
Fixed—Used to send tones of the duration you specify
in the DTMF tone length option.
Off—Used to turn off tones. No tones are sent when
you press a key.
You can also specify DTMF tone length when using the
Fixed option.
In the standby mode, select Menu > Settings > Phone
settings > DTMF tones > DTMF tone length > Short (0.1
second) or Long (0.5 second).
Welcome note
You can write a welcome note that briefly appears on the
display screen, if provided by your service provider,
whenever you switch your device on.
Predictive text input is not available for entering Welcome
note text.
1 In the standby mode, select Menu > Settings > Phone
settings > Welcome note.
2 Enter a note (up to 44 characters).
Press * to display and select from available special
characters.
3 When you are finished, select Options > Save.
Select Delete if you want to delete the previous text and
begin creating another welcome note.
Banner
Banner is a network service. See “Network Services” on
page 8.
If your wireless service provider supports this feature, you
can choose whether the display shows the operator logo
or your own banner in text when the device is in the
standby mode.
In the standby mode, select Menu > Settings > Phone
settings > Banner > Default or Customize.
Help text activation
Your device displays brief descriptions for most menu
items. When you arrive at a feature or menu, pause for
about 10 seconds, and wait for the help text to display.
Scroll through the full help text, if necessary.
The default setting for help text is on. However, you can
turn help text on or off.
In the standby mode, select Menu > Settings > Phone
settings > Help text activation > On or Off.