Filter
Top Products
Settings
55
Copyright © 2005 Nokia. All rights reserved.
If your device cannot find a preferred network, it selects a
network automatically based on the option you choose in
the Network.
Roaming options
You can set your device to roam or search for another
network when you are not in your home area. These
options are carrier dependent and may differ from those
described.
1 In the standby mode, select Menu > Settings >
Network > Roaming options.
2 Select one of the following:
Home only—You can make and receive calls in your
home area only.
Automatic—The device automatically searches for
service in another digital network. If one is not found,
the device uses analog service. The roaming rate applies
when not in the home service area.
3 Select OK, if necessary, to confirm the activation.
Network services features
The following features are network services. See “Network
Services” on page 8.
Store a feature code
1 In the standby mode, select Menu > Settings >
Network services > Network feature setting.
2 Enter the feature code from your service provider (for
example, *900 to activate Divert if busy), and select
OK.
3 Select Call diverting.
4 Scroll to the type of diverting that matches the feature
code you entered (for example, Divert if busy), and
select Activate.
The activated feature code is now stored in your device,
and you are returned to the Feature code: field. Continue
entering other feature codes (for example, *900 to cancel
Divert if busy), or press the end key to return to the
standby mode.
When you enter a network feature code successfully, the
feature becomes visible in the Network services menu.
Call divert
Call divert tells your network to redirect incoming calls to
another number. Call divert is a network service and may
not work the same in all networks, so contact your
wireless provider for availability.