Filter
Top Products
GB 31
Settings folder ☛ Access
To open this menu you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The following settings can be altered from this menu.
Access Control
These are two different functions which normally require two
different PIN-Codes. The title of the window which prompts you
to enter the corresponding PIN states whether the access con-
trol PIN-Code or the Parental Control PIN-Code is required. *
)
The Access Control option prevents unauthorized changes of the
basic settings for the receiver in the Settings folder. From the fac-
tory the access code is set to 1234.
Receiver lock
If you select “Yes” you will have to enter the access code every
time you activate the Mediamaster from stand-by mode.
Age rating control
If you want everybody to have access to all available types of pro-
grammes, select “No”
If you select “Yes”, you may block programmes that are unsuit-
able for children.
Age Limit
Select an age limit between 3 and 18 years on the line that ap-
pears.
However, you should be aware that not all Service Providers have
implemented the necessary codes for these functions in their
transmissions.
Change access code
You can change the access code from the standard factory
setting of 1234. DO NOT FORGET YOUR ACCESS CODE!
Without it, you will not have access to any of the functions
that require the code!
NaviBars
‘letterbox’‘fullscreen’
Picture format
If you have a TV set with a 4:3 picture format and the transmis-
sion is 16:9, you can select “Fullscreen” or “Letterbox”.
Fullscreen will fill the screen but some information on the left and
right sides will be cut off.
Letterbox will give a complete picture, but black areas will be vis-
ible at the top and bottom of the screen.
*
)
Exception: If a channel has been locked using the edit chan-
nel function and the digital receiver is operated without CI
module/smartcard the PIN-Code of the access control function
has to be entered.