Filter
Top Products
GB 6
Time adjustment
The time is adjusted using the cursor up/cursor down buttons,
±half an hour at a time. You can also change the minutes using
the cursor left/cursor right. buttons.
•Press select to finish the first-time installation and to open
the NaviBars.
Channel search in progress
This menu will be shown while the Mediamaster is searching
for TV and radio channels.
All channels that are found will be listed on the screen.
Please note that the search procedure may take a few minutes.
You can cancel the search at any time by pressing select.
When the search procedure has ended, a message will tell you
how many TV and radio channels have been found.
•Press select to continue.
Channel search
• Select the “Automatic Search” alternative.
•Press select to start the search process.
One antenna/one LNB configuration
Select this alternative if you have one (1) LNB mounted on the
antenna.
•Press opt to view the predefined channel.
LNB type
Select the correct LNB type for your configuration. The most
common values, including Universal LNB, can be selected us-
ing the
cursor left/cursor right button
.
LNB offset voltage
If the cable from the antenna is very long, the voltage at the LNB
could be too low to change the polarisation. You can increase
the voltage to the LNB by 0.5 V.
Satellite
Select one of the pre-programmed satellites.
Predefined channel
Select one of the predefined channels and adjust the antenna
until a TV picture from the predefined channel is visible in the
background.
•Press select to confirm all settings and then carry out the
channel search procedure.
Quick guide