Filter
Top Products
Settings
33
Normal—The device receives
incoming calls as usual.
Data calls only
—The device
receives only data calls.
Fax calls only—The device receives
only fax calls.
2. When you are finished receiving
the fax or data call, the phone will
return to Normal call mode.
Data transfer
To view the transmission speed when
sending or receiving data or fax calls,
in standby mode, select Menu >
Settings > Call settings > Data/fax
calls > Data rate display > Graphic
or Off.
Call summary
Your phone can display the time spent
on a call when you hang up.
In the standby mode, select Menu >
Settings > Call settings >
Call summary > On or Off.
■ Phone settings
Phone language
The phone language you choose
affects the time and date formats of
the clock, alarm clock, and calendar.
Automatic keyguard
To set the keypad of your phone to lock
automatically after a preset time delay
(from 10 seconds to 60 minutes), do
the following:
1. In the standby mode, select
Menu > Settings > Phone
settings > Automatic keyguard >
On or Off.
2. If you select On, Set delay: is
displayed.
3. Enter the delay (in minutes and
seconds), and select OK.
Important: When keyguard is
on, calls may be possible to
the emergency number
programed into your phone.
Enter the emergency number,
and press the call key.
The number is displayed only
after you enter the last digit.
DTMF tones
DTMF tones sound when you press the
keys on your phone keypad. You can
use DTMF tones for many automated
dial-up services such as banking and
airlines, or for entering your voice
mailbox number and password.
DTMF tones are sent during an active
call and can be sent manually from
your phone keypad, or sent
automatically by saving them in
your phone.
9241535_2125_en_au.fm Page 33 Monday, September 5, 2005 5:20 PM