Filter
Top Products
Settings
39
1. In the standby mode, select Menu
> Settings > Security settings >
Call restrictions.
2. Enter the security code, and select
OK. See “Lock code”, p. 39.
3. Select the type of calls you wish to
restrict:
Restrict outgoing calls > Select,
Add restriction, Edit, or Delete—
Calls cannot be made.
Restrict incoming calls > Select or
All calls—Calls cannot be received.
Phone lock
The Phone lock feature protects your
phone from unauthorised outgoing
calls or unauthorised access to
information stored in the phone. When
phone lock is enabled, Phone locked is
displayed each time you turn your
phone on.
1. In the standby mode, select
Menu > Settings > Security
settings >Access Codes. >
Phone lock.
2. Enter the lock code, and select OK.
See “Lock code”, p. 39.
3. Select On or Off.
If you selected On, each time you
power on your phone you must enter
your lock code and the lock code must
be accepted before the phone will
function normally.
Allow numbers when
phone locked
When phone lock is on, the only
outgoing calls that can be made are to
the emergency number programed into
your phone (for example, 111 or 000 or
911) and the number stored in the
Allowed number when phone locked
location.
To store an allowed number, do the
following:
1. In the standby mode, select
Menu > Settings > Security
settings >Access Codes. > Allowed
number when phone locked.
2. Enter the lock code and select OK.
See “Lock code”, p. 39.
3. Enter the phone number,
and select OK.
Call an allowed phone
number
In the standby mode, enter an allowed
number and press the call key.
Lock code
When you change your lock code,
make sure you store it in a safe place,
away from your phone. Avoid entering
access codes similar to emergency
numbers such as 111 or 000 or 911 to
prevent accidental dialling of the
emergency number.
9241535_2125_en_au.fm Page 39 Monday, September 5, 2005 5:20 PM