Filter
Top Products
Voice
46
Activate a voice command
After you have associated a voice tag
with a phone function, you can issue a
command by speaking the voice tag.
1. Select and hold Contacts.
2. When Speak now appears,
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found: is displayed, and the phone
plays the recognized voice tag through
the earpiece. The function you
requested is activated.
Options
After you have associated a voice tag
to a command, in the standby mode,
select Menu > Voice > Voice
commands > select the appropriate
voice tag command > Options >
Playback, Change, or Delete.
■ Voice recorder
This feature allows you to record
speech or sound with your phone and
listen to them later. The total available
time is 30 seconds if no memos have
been stored. The maximum length of a
recording depends on how much
memory remains available.
The recorder cannot be used when a
data call connection is active.
Record speech or sound
1. In the standby mode, select Menu
> Voice > Voice recorder > Record.
2. After the recorder start tone is
heard, begin recording speech or
sound.
3. When you are finished recording,
select Stop.
4. Enter the title for the recording,
and select OK.
Options
After you save a recording to the
Recordings list, highlight the
recording, and select Playback, Delete,
Edit title, and Alarm or Add alarm.
9241535_2125_en_au.fm Page 46 Monday, September 5, 2005 5:20 PM