Filter
Top Products
Voice
45
Dial a number
1. In the standby mode, select and
hold Contacts. When you hear
several beeps and Speak now is
displayed, release Contacts.
2. Pronounce the voice tag clearly
into the microphone.
When the phone finds the voice
tag, Found: is displayed, and the
phone automatically dials the
number. If the phone does not
locate a number or recognize the
voice tag, No match found is
displayed.
Voice tags
After you have associated a voice tag
to a contact, in the standby mode,
select Menu > Voice > Voice tags >
Options > Playback, Change, or Delete.
■ Voice commands
Set as many as five voice commands,
to allow hands-free operation of
certain phone features.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the phone
function.
1. In the standby mode, select Menu
> Voice > Voice commands.
2. Select the phone function you wish
to tag: Profiles, Voice mailbox,
Voice recorder or Call register.
3. If necessary, select an option
associated with that function, and
Options > Add command.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you want
to cancel the recording.
The phone replays and saves the
recorded tag. appears next to
commands that have voice tags
assigned.
9241535_2125_en_au.fm Page 45 Monday, September 5, 2005 5:20 PM