Filter
Top Products
Advanced features
50
Saving calling card information
1 Press Menu 4-1-7 (Settings > Call settings > Calling card).
2 Enter your security code, then press OK. For more information on security codes, see
“Security code” on page 58.
3 Scroll to one of the four memory locations, then press Options. Scroll to Edit, then
press OK.
4 Select Dialing sequence.
5 Scroll to one of the three sequence types as described in the following table, then
press Select. Enter the required information (access number or prefix and card
number).
6 Press OK to confirm your entries. Press OK to save your changes.
7 Scroll to Card name, then press Select. Enter the card name, then press OK.
Note: This procedure might not work with all calling cards. Please look at the
back of your calling card or contact your long distance company for more
information.
Choosing a calling card to use
Use Menu 4-1-7 (Settings > Call settings > Calling card) to select a calling card to
use. You will be required to enter your security code.
Making calling card calls
After you have saved your calling card information in your phone, you can make a call
using your calling card.
1 Enter the phone number, including any prefix (such as 0 or 1) that your calling card
may require when you make a calling card call. See your calling card for instructions.
2 Press and hold the Send key for a few seconds until your phone displays
Card call. Your phone displays Wait for tone, then press OK.
3 When you hear the tone or system message, press OK.
4 Your phone displays Wait for tone, press OK again. When you hear the tone or
system message, press OK.
Dialing sequence Use for cards that require you to:
Access number + phone
number + card number
Dial 1-800 access number, phone number, then card
number (+ PIN if required)
Access number + card
number + phone number
Dial 1-800 access number, card number (+ PIN if
required), then phone number
Prefix + phone number +
card number
Dial the prefix (numbers that must precede the phone
number) and phone number you want to dial, then card
number (+ PIN if required)