Filter
Top Products
Organizer
65
4 You can also press Options, scroll to Add, Subtract, Multiply, Divide, Square, or
Square root, and press Select.
5 Enter the second number.
Repeat steps 3 and 4 as many times as necessary.
A subtotal is shown after you enter the next operand (+, -, *, or /).
6 For a total, press Options twice.
7 To start a new calculation, press and hold Clear for two seconds.
Note: This calculator has limited accuracy and rounding errors may occur,
especially in long divisions.
•STOPWATCH
You can use your phone Stopwatch feature to time an event in hours, minutes and
seconds. The event time can be saved, viewed, or deleted.
Warning! Your phone must be switched on to use this function. Do not switch
the phone on when wireless phone use is prohibited or when it may cause
interference or danger.
Important: Using the stopwatch consumes the battery and the operating time
of the phone will be reduced. Be careful not to let it run in the background when
performing other operations with your phone.
Time an event using split timing
The split time function allows you to measure the total time for an event, yet allows
you to capture the elapsed time at various intervals. To measure split time:
1 From the Organizer menu, scroll to Stopwatch and press Select.
2 Scroll to Split timing, then press Select.
3 Press Start.
The running time appears on the display.
Once the split timer has started, you can:
• Press Split to display the split time while the timer continues to display elapsed time.
•Press Stop to stop the timer and view the total elapsed time.
If you continue pressing Split, the most recent split time appears at the top of the list
of split times. You can scroll to review previous times.
View timing options
Once you have stopped timing an event (using lap or split), you have the option to save
the information, reset the stopwatch, or continue timing (split timing only).
While stopwatch is running, press Stop, then press Options. Select one of the
following:
• Save save the current timing data. Enter a name, then press OK.
• Reset clears the current timing data and resets the timer.
• Start restarts the split timer from the point the timer was stopped.