Filter
Top Products
Copyright © 2006 Nokia. All rights reserved.
Settings
60
Change lock code
When changing the lock code, avoid
using codes similar to emergency
numbers such as 111 to prevent
accidental dialling of an emergency
number.
If you enter an incorrect lock code five
times in a row, your phone may ask you
for the security code. By default, the
security code is the five-digit number,
12345.
Note: If you enter the wrong
lock code five times in
succession, your phone will
not accept your current lock
code for 5 minutes. This
occurs even if when you
power down the phone
between incorrect attempts.
To change the phone lock code, do the
following:
1. In standby mode, select Menu >
Settings > Security.
2. Enter the current lock code, and
select OK.
3. Select Change lock code.
4. Enter the new lock code (only 4
characters), and select OK.
5. Enter the new lock code again for
verification, and select OK.
When you change your lock code,
make sure to remember it. If necessary,
write it down and store it in a safe
place away from your phone.
Avoid entering a lock code similar to
emergency numbers to prevent
accidental emergency calls.
Call restrictions
Call restrictions allows you to block or
permit numbers for incoming or
outgoing calls.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
3. Select Call restrictions and the type
of calls you wish to restrict:
Restrict outgoing calls—Set
restrictions on making calls.
Restrict incoming calls—Set
restrictions on receiving calls.
4. Select whether to block or allow
numbers:
Blocked numbers—Set numbers
that are blocked on incoming calls,
allowing all other numbers. When a
number is blocked, the call is sent
to voice mail.
Allowed numbers—Set numbers
that are allowed, blocking all other
numbers.
5. To modify the restriction list, select
from the following options:
Select—Add numbers to the
restriction list.