Filter
Top Products
Copyright © 2006 Nokia. All rights reserved.
Settings
63
(for example, *900 to cancel Divert if
busy), or press the end key to return to
standby mode.
When you enter a network feature
code successfully the feature becomes
visible in the Network services menu.
Call divert
Call divert tells your network to
redirect incoming calls to another
number. Call divert is a network service
and may not work the same in all
networks, so contact your wireless
provider for availability and
information.
To activate, do the following:
1. In standby mode, select Menu >
Settings > Network services > Call
divert and the following:
Divert all calls—Divert all calls to
the number you specify.
2. Select Activate.
3. Enter the number to which your
calls, data, or other information are
diverted, and select OK.
To cancel, in standby mode, select
Menu > Settings > Network services >
Call divert > Cancel all call diverting.
Cancel all call diverting may affect
your ability to receive voice mail
messages. Contact your wireless
provider for specific details.
Call waiting
Call If your wireless provider supports
this feature, call waiting notifies you
of an incoming call even while you are
in a call. You can accept, reject, or
ignore the incoming call.
To activate, in standby mode, select
Menu > Settings > Network services >
Call waiting > Activate.
During a call, select Answer or press
the call key to answer the waiting call.
The first call is put on hold. Press the
end key to end the active call.
To cancel, in standby mode, select
Menu > Settings > Network services >
Call waiting > Cancel.
■ Restore factory
settings
You can reset some of the menu
settings to their original values.
Data that you have entered or
downloaded is not deleted (for
example, entries in your contacts list
are not affected).
1. In standby mode, select Menu >
Settings > Restore factory sett.
2. Enter the lock code, and select OK.
Note: Depending on your
wireless service provider or
network operator, your device
may request the security code
(defaulted to 12345) instead
of the lock code.