Nokia 3155 Cell Phone User Manual


 
Media
43
Copyright © 2005 Nokia. All rights reserved.
3. If you have already saved radio
channels, select or to scroll
to the channel you would like to
listen to.
To select a radio channel location,
briefly press the corresponding
number keys.
4. To turn off the radio, press and hold
the end key, or select Options >
Switch off.
Options
With the radio on, select Options and
one of the following:
Switch off—Turn off the radio.
Save channel—Save the current station
to one of 20 locations (only available
with a new station entered).
Channels—Scroll up or down to select
a channel from 20 locations. With an
existing channel highlighted, select
Options > Delete channel or Rename to
delete or rename the saved channel.
Mono output or Stereo output—Listen
to the radio in monaural mode
(default) or in stereo. Stereo output is
available through a stereo
enhancement.
Loudspeaker or Headset—Listen to the
radio through the speakerphone or
through the headset.
Set frequency—Manually enter the
frequency of a known radio station.
To set the radio frequency, press * and
use the keypad to enter the frequency
of a known radio station.
To adjust the radio volume, press the
volume up and down keys.
When an application using a browser
connection is sending or receiving
data, it may interfere with the radio.
When you place or receive a call, the
radio automatically mutes. When the
call ends, the radio switches back on.
Tune and save a radio channel
You can save a preset station to any
one of 20 locations in memory.
1. With the radio on, select or
to change the radio frequency in
0.1 MHz steps, or select and hold
or to start the channel
search. Searching stops when a
channel is found.
2. To save the channel, select Options
> Save channel.
3. Enter a name for the channel, and
select OK.
Voice recorder
This feature enables you to record
pieces of speech or sound with your
device and listen to them later. The
total available time is 3 minutes with
no memos stored. The maximum
length of a recording depends on how
much memory remains available.