Filter
Top Products
Settings
51
Copyright © 2005 Nokia. All rights reserved.
International prefix
You can store an international dialling
prefix into your device. In standby
mode, select Menu > Settings > Call >
International prefix.
In standby mode, when you enter +
(press * twice) at the beginning of a
phone number, your device
automatically inserts the international
dialling prefix that you have stored
after you press the call key. See "Insert
dialling codes," p. 28.
Data or fax calls
Data and fax calling is a network
service. See "Network Services," p. vii.
If your wireless service provider or
network operator supports this feature,
you can set up the device to send or
receive data and fax calls with a
terminal, such as a PDA or PC,
connected.
For better performance during data
calls, place the device on a stationary
surface. Do not move the device by
holding it in your hand during a data
call.
For more information on connectivity,
refer to the PC/PDA Connectivity Guide
which can be downloaded
from the Nokia website at
http://www.nokia-asia.com.
1. In standby mode, select Menu >
Settings > Call > Data/fax calls >
Incoming data/fax call and one of
the following options:
Normal—The device receives
incoming calls as usual.
Data calls only—The device receives
only data calls.
Fax calls only—The device receives
only fax calls.
2. When finished with receiving the
Data or Fax call, the phone will
return to Normal mode.
Data transfer
You can view the transmission speed
when sending or receiving data and
fax calls.
In standby mode, select Menu >
Settings > Call > Data/fax calls > Data
rate display > Graphic or Off.
Call summary
Your device can display the time spent
on a call when you hang up. In standby
mode, select Menu > Settings > Call >
Call summary > On or Off.
Ringing tone for no caller ID
You can select a different ringing tone
for calls received with no caller ID.
In standby mode, select Menu >
Settings > Call > Ringing tone for no
caller ID > On or Off.