Filter
Top Products
Settings
49
Copyright © 2005 Nokia. All rights reserved.
Date and time auto-update
Auto-update is a network service. See
"Network Services," p. vii. If your
wireless service provider or network
operator supports this feature, you can
allow the digital network to set the
clock, which is useful when you are out
of your home area, for instance when
you have traveled to another network
or time zone.
In standby mode, select Menu >
Settings > Time and date > Auto-
update of date & time > On, Confirm
first, or Off.
If you use the Auto-update of date &
time option while outside your digital
network, you may be prompted to
enter the time manually. Network time
will replace the time and date when
you reenter your digital network.
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged, and
you are still outside of the digital
network).
■ Call settings
Anykey answer
Anykey answer enables you to answer
an incoming call. Briefly press any key
except the right selection key or
end key.
In standby mode, select Menu >
Settings > Call > Anykey answer > On
or Off.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated, your
device redials the number (number of
times is specified by the network),
and notifies you when the network is
available.
In standby mode, select Menu >
Settings > Call > Automatic redial >
On or Off.
Speed dial
You can activate or deactivate speed
dial. In standby mode, select Menu >
Settings > Call > Speed dialling > On or
Off. See "Set up speed dial," p. 35.