Filter
Top Products
Settings
50
Copyright © 2005 Nokia. All rights reserved.
Open fold to answer
By default, your phone answers an
incoming call when you open the fold.
You can change the default setting to
have your phone not answer calls with
the fold open.
In standby mode, select Menu >
Settings > Call > Answer when fold is
opened > On or Off.
Calling card
If you use a calling card for long
distance calls, you can save the calling
card numbers in your device. Your
device can store up to four calling
cards. Contact your calling card
company for more information.
Save information
1. In standby mode, select Menu >
Settings > Call > Calling card.
2. Enter your security code, and select
OK. See "Change lock code," p. 56.
3. Scroll to one of the four card
memory locations, and select
Options > Edit > Dialling sequence
and one of the following sequence
types:
Access no.+ phone no.+ card no.—
Dial the access number, the phone
number, then the card number (and
the PIN, if required).
Access no.+ card no.+ phone no.—
Dial the access number, the card
number (and the PIN, if required),
then the phone number.
Prefix+ phone no.+ card no.—Dial
the prefix (numbers that must
precede the phone number) and
phone number you want to dial,
then the card number (and the PIN,
if required).
4. Enter the required information
(access number or prefix and card
number), and select OK to confirm
your entries.
5. Select Card name, enter the card
name, and select OK.
Make calls
After you have saved your calling card
information in your device, you can
make a call using your calling card.
1. In standby mode, select Menu >
Settings > Call > Calling card.
2. Enter your lock code, and select OK.
See "Change lock code," p. 56.
3. Select your desired calling card.
4. Press the end key to return to
standby mode; then enter the
phone number, including any prefix
(such as 0 or 1) that your calling
card may require when you make a
calling card call. See your calling
card for instructions
5. Press and hold the call key for a few
seconds until Card call appears.
6. When you hear the tone or system
message, select OK.