Filter
Top Products
Settings
53
Copyright © 2005 Nokia. All rights reserved.
Start-up tone
You can select to have a start-up tone
when you first turn on your device.
In standby mode, select Menu >
Settings > Phone > Start-up tone >
On or Off.
Help text activation
Your device displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
14 seconds and wait for the help text
to display. If necessary, use the scroll
key to page through the full help text.
The default setting for help text is On.
However, you can turn help text on or
off. In standby mode, select Menu >
Settings > Phone > Help text
activation > On or Off.
■ Voice commands
Before using voice tags, note the
following:
• Voice tags are not language-
dependent, but depend on the
speaker’s voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
Hands-free operation
You can set as many as 16 voice
commands to enable hands-free
operation of certain features in your
device.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the device
function.
1. In standby mode, select Menu >
Settings > Voice commands.
2. Select the device function you
want to tag: Profiles, Voice
mailbox, Radio, Voice recorder, or
Call register.
3. If necessary, select an option
associated with that function.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you want
to cancel the recording.
The device replays and saves the
recorded tag. appears next to
commands with voice tags assigned.