Filter
Top Products
38 Copyright © 2004 Nokia
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
# key.
Be precise; you will need this information in "Setup voice mail with dialing codes",
page 38.
Insert dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears in
the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the Call key before sending the numbers or codes
that follow.
Setup voice mail with dialing codes
1. At the start screen, select Contacts > 1-touch dialing.
2. Scroll to an empty 1-touch dialing slot, and select Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes and enter any codes as necessary using the information that
you wrote down from "Write down voice mailbox number and process", page 38.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key
at the start screen.
If 1-touch dialing is off, the device displays a prompt asking if you would like to turn
1-touch dialing on.