Filter
Top Products
66 Copyright © 2004 Nokia
■ Security settings
If your wireless service provider supports these features, you may be able to change
certain security settings in your phone such as Phone lock, Allowed no. when phone
locked, Change lock code, Call restrictions, and Voice privacy.
Phone lock
The lock code controls access to your phone. The preset code is 1234 or the last four
digits of your phone number.
Note: If you enter the wrong lock code 5 times in succession, you will not be
able to enter a code for 5 minutes, even if you power off the device between
incorrect entries.
Activate or deactivate phone lock
The device lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the device. When phone lock is
activated, Phone locked is displayed each time you turn your phone on.
Important: Call not allowed is displayed if you attempt to place a call while
phone is locked. However, calls may be possible to the official emergency
number programmed into your phone.
1. At the start screen, select Menu > Settings > Security settings.
2. Enter the lock code, and select OK. (See "Change lock code", page 67 for
more information.)
3. Select Phone lock and one of the following options:
Off—Immediately turns off the device lock feature.
Lock now—Immediately turns on the device lock feature.
On power-up—The device will be locked when you power on again.
To answer a call with phone lock on, select Answer, or press the Call key.
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
following numbers:
• The emergency number programmed into your phone (for example, 911).
• The number stored in the Allowed no. when phone locked location.
1. At the start screen, select Menu > Settings > Security settings.