Filter
Top Products
Password — A password may be needed to make a data connection and is usually
provided by your service provider.
Authentication — Select Secure to always send your password encrypted or
Normal to send your password encrypted when possible.
Homepage — Depending on the access point you are setting up, enter the web
address or the address of the multimedia message center.
Use access point — Select After confirmation if you want the device to ask for
confirmation before the connection using this access point is created, or
Automatically if you want the device to connect to the destination using this access
point automatically.
Select Options > Advanced settings and from the following:
Network type — Select the internet protocol type to transfer data to and from
your device. The other settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of your device.
DNS addresses — Enter the IP addresses of the primary and secondary DNS servers,
if required by your service provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy server.
Proxy port number — Enter the port number of the proxy server.
WLAN internet access points
Select Menu > Settings and Connectivity > Destinations > Access point, and
follow the instructions on the screen.
To edit a wireless LAN (WLAN) access point, open one of the access point groups and
select an access point marked with
.
Follow the instructions from your WLAN service provider.
144 Connectivity
© 2010 Nokia. All rights reserved.