Filter
Top Products
Security settings for 802.1x and WPA/WPA2
WPA/WPA2 — Select the means of authentication: EAP to use an extensible
authentication protocol (EAP) plug-in, or Pre-shared key to use a password.
Complete the appropriate settings:
EAP plug-in settings — Enter the settings according to the instructions from your
service provider.
Pre-shared key — Enter a password. The same password must be entered on the
WLAN access point device.
WPA2 only mode — Only WPA2 enabled devices are allowed to establish a
connection in this mode.
Advanced WLAN settings
Select Options > Advanced settings and from the following:
IPv4 settings — Enter the IP address of your device, the subnet IP address, the
default gateway, and the IP addresses of the primary and secondary DNS servers.
Contact your internet service provider for these addresses.
IPv6 settings — Define the type of DNS address.
Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11) manually,
select User defined.
Proxy server address — Enter the address for the proxy server.
Proxy port number — Enter the proxy port number.
Active data connections
Select Menu > Settings and Connectivity > Connection mgr..
In the active data connections view, you can see open data connections:
146 Connectivity
© 2010 Nokia. All rights reserved.