Filter
Top Products
An alarm is active.
The ringing type is set to silent.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When the
indicator is blinking, your
device is trying to connect
with another device.
A GPRS packet data connec
tion is available (network
service). If the icon is
, the connection is active. If
the icon is
, the connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is
, the connection is
active. If the icon is
, the connection is on hold.
A UMTS packet data connect
ion is available (network
service). If the icon is
, the connection is active. If
the icon is
, the connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The icon
may vary between regions. If the icon is
, the
connection is active. If the icon is
, the connection
is on hold.
You have set the device to
scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that does
not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
data cable.
A headset is connected to the device.
A handsfree car kit is connected to the device.
A loopset is connected to the device.
Your device is synchronising.
© 2009 Nokia. All rights reserved.
21
You have an ongoing push
to talk (PTT) connection.
Your push to talk connection is in do not disturb
mode, because the ringing type of your device is set
to
Beep once
or Silent, or you have an incoming or
ongoing phone call. In th
is mode, you cannot make
PTT calls.