Filter
Top Products
28 Copyright © 2008 Nokia. All rights reserved.
Call functions
Video sharing settings
A person-to-person connection is also known as a session
initiation protocol (SIP) connection. Before you can use
video sharing, ask your service provider for the configured
SIP profile to be used in your device.
Select > Settings > Phone sett. > Connection > Video
sharing and from the following:
Video sharing — to select whether the video sharing is
enabled
SIP profile — to select a SIP profile
Video saving — to set whether the live videos are
automatically saved
Preferred saving memory — to select whether to save the
videos to the device memory or to a memory card
Capability alert tone — to set an alert tone to sound when
video sharing is available during a call
If you know a recipient’s SIP address, you can save it to
Contacts. Select > Contacts, the contact, and Options
> Edit > Options > Add detail > SIP or Share video. Enter
the SIP address (username@domainname). You can use an
IP address instead of a domain name.
Share live video or video clip
1 To share live video you are recording with the device
camera, select Options > Share video > Live video
during a voice call. To share a saved video clip, select
Video clip and the clip you want to share.
2 The device sends the invitation to the SIP address you
saved to Contacts.
If necessary, to send the invitation, select the SIP
address of the recipient; or enter a SIP address, and
select OK.
3 Sharing begins automatically when the recipient
accepts the invitation, and the loudspeaker is active.
Use the toolbar buttons to control the video sharing.
4 To end the sharing session, select Stop. To end the voice
call, press the end key.
Accept an invitation
Your device rings when you receive an invitation. The
invitation shows the sender’s name or SIP address. Select
Yes to begin the sharing session. To decline the invitation
and to return to the voice call, select No.
Log
To view missed, received, or dialled calls; text messages;
packet data connections; and fax and data calls registered
by the device, select > Log.
In the standby mode, you can use the call key as a shortcut
to Dialled numbers in the Recent calls log (network
service).