Filter
Top Products
Copyright © 2008 Nokia. All rights reserved. 79
Connectivity
Phone Book Access, Generic Audio/Video Distribution,
Generic Access, and Generic Object Exchange. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Do not accept Bluetooth connections from sources you do
not trust.
A Bluetooth connection is disconnected automatically
after sending or receiving data.
Bluetooth connection settings
Select > Settings > Connectivity > Bluetooth.
Bluetooth — to switch Bluetooth connectivity on or off
My phone's visibility > Shown to all — to allow your
device to be found by other devices with Bluetooth
connectivity at all times. To allow your device to be found
for a defined time period, select Define period. For security
reasons it is advisable to use the Hidden setting whenever
possible.
My phone's name — to define a name for your device
Remote SIM mode > On — to enable another device, for
example, a car kit, to use the SIM card of your device using
Bluetooth technology (SIM access profile).
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
Send data
1 Open the application where the item you want to send
is saved.
2 Scroll to the item you want to send, and select Options
> Send > Via Bluetooth.
3 The device starts to search for devices within range.
Paired devices are shown with . Some devices may
show only the unique device addresses. To find out the
unique address of your device, enter the code *#2820#
in the standby mode.
If you have searched for devices earlier, a list of devices
found previously is shown. To start a new search, select
More devices.
4 Select the device with which you want to connect.