Filter
Top Products
54 Copyright © 2008 Nokia. All rights reserved.
Camera
clips saved in the .mp4 file format in a multimedia
message.
• To upload the video clip to a compatible online album,
select Sign in for Share online ().
• To open the Gallery, select Go to Gallery ().
• If you do not want to keep the video, select Delete
().
Camera settings
There are two kinds of settings for the still image camera:
active toolbar settings and main settings. To use active
toolbar settings, see "Active toolbar", p. 51. The active
toolbar settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again.
Still image camera settings
To change the main settings, select Options > Settings.
To set the image resolution (only available in the main
camera), select Image quality. The better the image
quality, the more memory the image consumes. To print
the image, select Print 5M - Large, Print 3M - Large, or
Print 2M - Medium. To send it through e-mail, select
E-mail 0.8M - Med.. To send the image through
multimedia messaging (MMS), select MMS 0.3M - Small.
To select whether to see the captured image after it is
captured or to continue capturing images immediately,
select Show captured image.
To add GPS location coordinates to each image file, select
Record location > On. Receiving a GPS signal may take
time or the signal may not be available.
To allow the zoom increments to be smooth and
continuous between digital and extended digital zoom,
select Extended digital zoom > On (continuous) (main
camera only). To allow the zoom increments to pause at
the digital and extended digital step point, select On
(paused). To limit the zoom to where the selected image
quality is maintained, select Off.
To return the default values to the camera settings, select
Restore camera settings.
Video settings
To change the main setting in video mode, select Options
> Settings.
To set the quality of the video clip, select Video quality.
Select Sharing if you want to send the video clip using a
multimedia message.
To add GPS location coordinates to the video clip, select
Record location > On. Receiving a GPS signal may take
time or the signal may not be available.