Filter
Top Products
Copyright © 2008 Nokia. All rights reserved. 53
Camera
To switch off the sequence mode, in the active toolbar,
select Sequence mode > Single shot.
Scenes
A scene helps you to find the right colour and lighting
settings for the environment. The settings of each scene
have been set according to a certain style or environment.
Scenes are only available in the main camera.
Select the image or video mode, and in the active toolbar,
select Scene modes and a scene available for the image or
video mode.
To make your own scene suitable for a certain
environment, scroll to User defined, and select Options >
Change. To copy the settings of another scene, select
Based on scene mode and the desired scene.
Record videos
1 To activate the main camera, open the lens cover. If the
camera is in the image mode, change to video mode. In
active toolbar, select Switch to video mode.
indicates video mode.
To activate the secondary camera, select Options > Use
secondary camera.
2 Press the camera key to start recording. With the
secondary camera, press the scroll key for recording.
is shown and a tone sounds, indicating that
recording has started.
To zoom in or out of the subject using the main camera,
press the volume keys, or, using the secondary camera,
scroll down or up.
3 To stop recording, select Stop. The video clip is
automatically saved to the Video clips folder in the
Gallery. See "Gallery", p. 46. The maximum length of
the video clip depends on the available memory.
To pause recording at any time, select Pause. Video
recording automatically stops if recording is set to pause
and there are no keypresses within a minute. Select
Continue to resume recording.
To make lighting and colour adjustments before recording
a video, select from the active toolbar settings. See "Active
toolbar", p. 51 and "Scenes", p. 53.
After recording a video
After you record a video clip, select the following from the
active toolbar (available only if Show captured video is set
to On. See "Video settings", p. 54):
• To immediately play the video clip you just recorded,
select Play .
• To send the video clip using a multimedia message,
e-mail, or Bluetooth connectivity, press the call key, or
select Send ( ). You may not be able to send video