Filter
Top Products
3When Remove memory card and press 'OK' is displayed, remove the back cover
of the device, and push the card in, until you hear a click.
4 Pull out the memory card, and replace the back cover. If the device is switched
on, select OK.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge
it before you can switch on your phone for the first time. If the phone indicates a low
charge, do the following:
Charge from a wall outlet
1 Connect the charger to a wall outlet.
2 Connect the charger to your phone.
3 When the phone indicates a full charge, disconnect the charger from the phone,
then from the wall outlet.
If the battery has not been used for a long time, to begin charging, you may need to
connect the charger, then unplug and reconnect it.
You do not need to charge the battery for a specific length of time, and you can use
the phone while it is charging.
If the battery is completely discharged, it may take several minutes before the
charging indicator is displayed or before any calls can be made.
Tip: Disconnect the charger from the wall outlet when the charger is not in use. A
charger that is connected to the outlet consumes power even when it is not connected
to the phone.
Get started 11