Filter
Top Products
When adding contacts or editing voice commands, do not use very short or similar
names for different contacts or commands.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Assign default numbers and addresses
If a contact has several numbers or addresses, a default number or address makes it
easier for you to call or send a message to the contact. The default number is also
used in voice dialling.
1Select Menu > Contacts.
2 Select a contact and Options > Defaults.
3 Select a default to which you want to add a number or an address.
4 Select a number or an address you want to set as a default.
5 To exit the Defaults view and save the changes, tap outside the view.
Ringing tones, images, and call text for contacts
You can define a ringing tone for a contact or contact group, and an image and call
text for a contact. When the contact calls you, the device plays the selected ringing
tone and shows the call text or image (if the caller’s phone number is sent with the
call and your device recognises it).
Select Menu > Contacts.
Add more fields to a contact details view
Select the contact and Options > Edit > Options > Add detail.
Define a ringing tone for a contact or contact group
Select the contact or contact group and Options > Ringing tone, and select a ringing
tone.
Remove the ringing tone from a contact
Select Default tone from the list of ringing tones.
Add an image for a contact
Select a contact saved in the device memory and Options > Add image, and select
an image from Gallery.
Define a call text for a contact
Select the contact and Options > Add call alert text. Enter the call text, and select
.
34 Contacts