Filter
Top Products
Change the settings for a route
1 In the route planner view, open the Settings tab. To get to the route planner view
from the navigation view, select Options > Route points or Route points list.
2 Set the transportation mode to Drive or Walk. If you select Walk, one-way streets
are regarded as normal streets, and walkways and routes through, for example,
parks and shopping centres, can be used.
3 Select the desired option.
Select the walking mode
Open the Settings tab, set the transportation mode to Walk, and select Preferred
route > Streets or Straight line. Straight line is useful on off-road terrain as it
indicates the walking direction.
Use the faster or shorter driving route
Open the Settings tab, set the transportation mode to Drive, and select Route
selection > Faster route or Shorter route.
Use the optimised driving route
Open the Settings tab, set the transportation mode to Drive, and select Route
selection > Optimised. The optimised driving route combines the advantages of both
the shorter and the faster routes.
You can also choose to allow or avoid using, for example, motorways, toll roads, or
ferries.
Connectivity
Your device offers several options to connect to the internet or to another compatible
device or PC.
Data connections and access points
Your device supports packet data connections (network service), such as GPRS in the
GSM network.
You can also use a WLAN data connection. Only one connection in one wireless LAN
can be active at a time, but several applications can use the same internet access
point.
To establish a data connection, an access point is required. You can define different
kinds of access points, such as the following:
• MMS access point to send and receive multimedia messages
Connectivity 79