Filter
Top Products
Tools
94
Copyright © 2006 Nokia. All rights reserved.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement settings
Indicators shown in the standby mode:
A headset is connected.
A loopset is connected.
The headset is unavailable, or Bluetooth connectivity
to a headset is lost.
Select Headset, Loopset, or Bluetooth handsfree, and the
following options are available:
Default profile—to set the profile that you want activated
each time you connect a certain enhancement to your
device. See “Profiles—set tones”, p. 8.
Automatic answer—to set the device to answer an
incoming call automatically after 5 seconds. If the ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see “Voice dialing”, p. 12.
To activate enhanced voice commands for starting
applications or profiles, you must open the Voice com.
application and its Profiles folder. Press , and select
Tools > Voice com. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold and say a voice
command. The voice command is the name of the
application or profile displayed in the list.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, scroll to it, select Options >
Change command, and enter the new voice command as
text. Avoid very short names, abbreviations, and acronyms.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognised voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Reset voice adapts..