Filter
Top Products
Tools
86
Copyright © 2006 Nokia. All rights reserved.
Left selection key—To assign a shortcut to the left
selection key ( ) in the standby mode, select an
application from the list.
Right selection key—To assign a shortcut to the right
selection key ( ) in the standby mode, select an
application from the list.
Active standby apps.—To select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key, by selecting an application from
the list. These scroll key shortcuts are not available if the
active standby is on.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if you
want the operator logo to show or not.
Display
Brightness—You can change the brightness of the display
to lighter or darker. The brightness of the display is
automatically adjusted according to the environment.
Pwr. saver time-out—The power saver on the display is
activated when the timeout period is over.
Light time-out—Select a time-out after which the
backlight of the main display is switched off.
Call settings
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(Set by network) (network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or Check
status to check if the function is active or not.
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See “Answer or reject a call”, p. 13.
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.