Filter
Top Products
Personalize your device
99
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection. To
stop the sound, press any key.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and start a
connection to a web page to download tones.
If you want the caller’s name to be said when your device
rings, select Options > Personalise > Say caller's name >
On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
Offline profile
The offline profile lets you use the device without
connecting to the wireless network. When you activate the
offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the offline profile is active, you can use your device
without a (U)SIM card.
Important: In the offline profile you cannot make
or receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
When you have activated the offline profile, you can still
use the wireless LAN (if available), for example, to read
your e-mail or browse on the internet. Remember to
comply with any applicable safety requirements when
establishing and using a wireless LAN connection. See
‘Wireless LAN’, p. 18.
To exit the offline profile, press , and select another
profile. The device reenables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connectivity is activated before using the
offline profile, it is deactivated. A Bluetooth connectivity
is automatically reactivated after you exit the offline
profile. See ‘Settings’, p. 84.