Filter
Top Products
[ 43 ]
Personalization
3 Select Customize, scroll to Profile name and press Select.
4 Enter the new name and press OK.
Note: You cannot rename the Normal profile.
Select and customize an enhancement profile
Note: You must have an enhancement (such as a loopset) attached to your phone prior
to selecting the Enhancement settings menu.
To select and customize profiles for use with the headset, handsfree device (car kit), loopset,
and TTY/TDD:
1 Press Menu > Settings > Enhancement settings.
2 Scroll to one of the following Enhancement profiles and press Select: Handsfree, Headset,
Loopset, or TTY/TDD.
HANDSFREE
For Handsfree, scroll to an option and press Select to enter the submenu and modify the settings.
• Default profile—Choose the profile to be activated automatically when your phone is
connected to a car kit.
• Automatic answer—Calls are answered automatically after one ring when your phone is
connected to a car kit. Scroll to On or Off and press Select.
• Lights—Choose to keep the phone lights always on or to shut off automatically after several
seconds. Scroll to On or Automatic and press Select.
HEADSET
The Default profile and Automatic answer options are your available choices. Please refer to
“Handsfree” for more information.
LOOPSET
The Default profile and Automatic answer options are available. Please refer to “Handsfree”
for a description of these options. In addition, the following option is available:
Use loopset—Enable use of the LPS-4 mobile inductive loopset. Scroll to Yes or No and
press Select.
TTY/TDD
The following options are available. Scroll to the option of your choice and press Select to enter
the option’s submenu and modify its settings.
Use TTY/TDD—Enable the use of a TTY/TDD device. Scroll to Yes or No and press Select.
Note: If the loopset is enabled, you’ll be asked to disable the loopset before enabling
TTY/TDD. Press Yes to disable the loopset (thus enabling TTY/TDD). Press No to leave the
loopset enabled.
• TIMED PROFILES
To activate a profile for a specific amount of time (up to 24 hours), you can utilize the
Timed setting.