Filter
Top Products
Nokia 6225 User Guide 33 Copyright © 2004 Nokia
Messages (Menu 2)
Listen to your voice mail messages
Once you have setup voice mail, you can retrieve your voicemail messages several ways:
• Dial the voice mailbox number using the keypad.
• Press and hold the 1 key.
• Press Listen if there is a notification message in the display.
• At the start screen, select Menu > Messages > Voice messages > Listen to
voice messages.
Once you connect to voice mail and the prerecorded greeting begins, follow the
automated instructions to listen to your voicemail messages.
Automate voice mail
You can insert special characters called “dialing codes” into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow
them in the dialing string.
Note: Voicemail services vary by service provider. The following
instructions are examples of common operations. Please check with your
service provider for specific instructions for using your voice mail service.
WRITE DOWN VOICEMAIL NUMBER AND PROCESS
1 Write down your voice mailbox number.
2 Call and check your voice mail as you normally would.
3 Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Important: Be precise; you will need this information in “Setup voice mail
with dialing codes” on page 34.
INSERT DIALING CODES
Press the * key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
* Bypasses a set of instructions.
p Pauses for 2.5 seconds before sending any numbers that follow.
w Waits for you to press the Talk key before sending the numbers or
codes that follow.