Filter
Top Products
52 Copyright © 2004 Nokia
• CALL SETTINGS
Location info sharing
Location info sharing is a network service. See “Network services” on page 3 for
more information.
If your wireless service provider supports this feature, then location info sharing allows
the phone to share position information over the network. For calls to emergency
numbers, this position information may be used by the emergency operator to
determine the position of the phone. The functionality and accuracy of this feature
is dependent on the network, satellite systems, and the agency receiving the
information. It may not function in all areas or at all times.
Note: Location information will always be shared with the network during
emergency calls to the official emergency number programmed into the
phone, regardless of which setting is selected. After placing an emergency
call the phone remains in emergency mode for five minutes. During this
time, the location information will be shared with the network. For more
information, see “Emergency calls” on page 76
.
At the start screen, select Menu > Settings > Call settings > Location info
sharing > 911 only or Location on > OK.
911 only—The phone’s location information is shared only during an emergency call
to the official emergency number programmed into your phone. The phone displays
on the start screen.
Location on—This is the phone default profile. The phone location information is
shared with the network whenever the phone is powered on and activated. The
phone displays on the start screen.
Anykey answer
Anykey answer allows you to answer an incoming call by briefly pressing any key
except the Power key, Left selection key, Right selection key, or End key.
At the start screen, select Menu > Settings > Call settings > Anykey answer >
On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number up to 10 times, and notifies you once the network is available.
At the start screen, select Menu > Settings > Call settings > Automatic redial >
On or Off.